Product's Info
제품소개
- All
- ACCESSORIES
- ADAPTER
- AIRSHAFT
- CHUCK
- FRICTION SHAFT
- MECHANICAL SHAFT
AIRSHAFT
YR-102S (3inch airshaft for heavy duty)
Most used in un/rewinding work because of cheap price. Recommended for work of which accurate winding...
Read More → AIRSHAFT
YR-101D (Fabric Position Adjustable Airshaft)
If the operator had to adjust the position of the fabric while working, the existing air shaft had to remove...
Read More → ADAPTER
YR-1200U
Single air entry will inflate two adapters. Two adapters weighs 5.6 kg, and maximum roll weight...
Read More → AIRSHAFT
YR-100D (LUG TYPE)
Enhanced structure to improve concentric of airshaft. 1. application : build that needs higher accuracy...
Read More → AIRSHAFT
YR-100S (LUG TYPE)
Most used in un/rewinding work because of cheap price. Recommended for work of which accurate winding....
Read More → AIRSHAFT
YR-200A (LEAF TYPE)
YR-200A can be used when roll weight is less than 500㎏ and minimum roll width is 10㎜. This type will help to reduce...
Read More → AIRSHAFT
YR-200B (LEAF TYPE)
As compared with YR-200A, handling work is very easy because weight is lighter than YR-200A by 40%...
Read More → AIRSHAFT
YR-201 (INNER TYPE)
This product is of same principal as YR-202. Three rows of lugs that are placed equally 120˚ will...
Read More → AIRSHAFT
YR-202D (INNER TYPE)
Particularly, the leaf is inner type and lug material is rubber. And body material is aluminum or steel. Body material...
Read More → AIRSHAFT
YR-202S (INNER TYPE)
Particularly, the leaf is inner type and lug material is rubber. And body material is aluminum or steel. Body material...
Read More → AIRSHAFT
YR-203 (INNER TYPE)
Acquired Korean Patent(#0217824) in 1993. Suitable for the thinnest material (4~20 microns) Best accuracy...
Read More → AIRSHAFT
YR-204 (INNER TYPE)
2 sets of lugs(3+3) will expand in turns. First set will sustain core at center point, then second set with rubber...
Read More → AIRSHAFT
YR-205 (INNER TYPE)
Unlike YR-202, it has valves for each rows which allows machine keep operation even if one row is out of order...
Read More → AIRSHAFT
YR-206A(special airshafts)
YR-206A is an airshaft which can replace rubber-coated rollers mainly used in paper winding lines...
Read More → AIRSHAFT
YR-300 (PIN TYPE)
Used for surface type or touch roll winder type. Use of lugs with pins will prevent carton distortion...
Read More → AIRSHAFT
YR-500 (SEPARATOR TYPE)
Suitable for thin metal(less than 3mm) winding work. Position of discs is easily adjustable by load/unloading air...
Read More → FRICTION SHAFT
YR-700 (AIR FRICTION)
Most of friction(differential) shaft has side-friction controlled slip between each cartridges made of force by spring or air...
Read More → FRICTION SHAFT
YR-701 (MECHANICAL FRICTION)
As stated in YR-700, this product has some disadvantages by using side pushed friction effect, but still applicable...
Read More → FRICTION SHAFT
YR-702 (MECHANICAL FRICTION)
One step further than YR-700 series, this product performs more precise work. Friction which makes roll slip is still...
Read More → CHUCK
YR-800 (Leaf Type)
Suitable for roll of big core, short length, light weight and low tension. Bending of core can be found in winding work...
Read More → CHUCK
YR 800 (Lug Type)
Suitable for roll of big core, short length, light weight and low tension. Bending of core can be found in winding work...
Read More → CHUCK
YR-801 (Torque actuated mechanical chuck)
This mechanical product chucks core with strong force, therefore distortion of cores can happen. It is recommended...
Read More → CHUCK
YR-802 (Spring actuated mechanical chuck)
This mechanical product chucks core with strong force, therefore distortion of cores can happen...
Read More → CHUCK
YR-804 (spring actuated mechanical chuck)
Chucking is done by an air cylinder Low defect ratio, but high repair cost. Recommended for special application...
Read More → MECHANICAL SHAFT
YR-900 (LUG TYPE)
Rarely used than airshafts, but still being used in small diameter of core or heavy rolls. Can be used in vacuum...
Read More → MECHANICAL SHAFT
YR-901 (Leaf Type)
Rarely used than airshafts, but still being used in small diameter of core or heavy rolls. Can be used in vacuum...
Read More → AIRSHAFT
YR-1000 (CYLINDER TYPE)
Shaft body works same as YR-900, but an air cylinder is placed at the one end of shaft which pushes lugs...
Read More → AIRSHAFT
YR-1100 (HANGER TYPE)
Handling of a heavy roll should be done by hoist and this shaft will clamp rolls and will be hung on hoist for easy handling...
Read More → ADAPTER
YR-1200A (AIR ADAPTER)
Single air intry will inflate two adapters. Two adapters weighs 5.6 kg, and maximum roll weight is 700 kg...
Read More → ADAPTER
YR-1200B (AIR ADAPTER)
Length and diameter of adapter can be customized. Especially good for narrow slitting rewinding...
Read More → ADAPTER
YR-1200D (ADAPTER)
For rarely worked 4~6 build. Caution : consistent adapter work can damage main shafts tube...
Read More → ADAPTER
YR-1200M (ADAPTER)
For rarely worked 4~6 build. Caution : consistent adapter work can damage main shafts tube. material : MC nylon...
Read More → ACCESSORIES
Lug & Plate for unwingding airshaft
"A" 는 LUG 를 나타내며 사양에 따라 12T~16T 까지 가능합니다.
Read More →